Toward Distinguishing between the Superchaotropic and Hydrophobic Characters of Nanometric-Sized Ions in Interaction with PEGylated Surfaces.

In this study, we explore the superchaotropic effect of various polyoxometalate or boron cluster nano-ions on hydrophilic neutral surfaces. Nano-ions, characterized by low charge densities, exhibit strong adsorption on non-ionic hydrophilic surfaces like PEGylated micelles. This adsorption phenomenon was attributed to the enthalpically favorable dehydration of nano-ions, the so-called superchaotropic effect. Here, we investigate the adsorption of three nano-ions, α-SiW12O404-, α-PW12O403-, and B12I122-, with decreasing charge density or increasing superchaotropicity (or hydrophobicity), on hydrophilic solid surfaces, PEGylated gold nanoparticles, and PEGylated gold-coated quartz crystal. Solid surfaces are devoid of hydrophobic regions, enabling the study of the subtle nuance between hydrophobic and superchaotropic effects. Unlike adsorption on PEGylated micelles, the adsorption constant decreases with a reduced charge density, aligning with the well-established principle that hydrophobic ions do not adsorb on hydrophilic surfaces. This research improves our understanding of the subtle difference between superchaotropic and hydrophobic effects in nano-ion adsorption phenomena.

Foam Flotation of Clay Particles Using a Bifunctional Amine Surfactant.

Understanding clay flotation mechanisms has become a major concern because of the increasing level of environmental contamination of soil and ground water by heavy metals and radionuclides. Clays are often used as sorbents for extracting metals in indirect flotation processes but can function simultaneously as defoamers. However, how foam generation and stability depend on the molecular interactions between the clays and surfactant is still controversial. In the present study, an amine polyethoxylated surfactant was used as a bifunctional surfactant that collected clay particles and acted as a foaming agent in the flotation process. The pH conditions strongly affected the surfactant physicochemical properties, allowing the clay extraction efficiency to be tuned. The interfacial recovery factor of the clays almost reached 100% under acidic (pH < 6) and neutral (pH 6-10) conditions, whereas it was negative under alkaline conditions (pH > 10), contrary to expectations. To elucidate the mechanisms involved in the particle flotation process for each of the pH conditions, the bulk and foam phases were analyzed. The effects of electrostatic interactions between the solutes and multiscale structure on the clay extraction behavior were investigated by electrophoretic measurements, dynamic light scattering, small-angle neutron scattering, and image analysis. Based on these results, three flotation processes were found depending on pH range: surfactant foam fractionation at pH > 10; clay particle foam flotation at pH 6-10; and particle froth flotation at pH < 6.

When Ions Defy Electrostatics: The Case of Superchaotropic Nanoion Adsorption.

Nanometer-sized anions, like polyoxometalates and borate clusters, bind to nonionic hydrated matter driven by the chaotropic effect, which arises from the favorable dehydration of the ions. Herein, we evaluate the adsorption and activity coefficient of the superchaotropic Keggin polyoxometalate SiW12O404- (SiW) on nonionic surfactant (C8E4) micelles by modeling small-angle X-ray and neutron-scattering spectra. Neither hard sphere nor electrostatic repulsion models reproduce the experimental activity coefficient of adsorbed SiW ions on the micelles. However, the activity and binding of SiW on the micelles is well-described by a Langmuir adsorption isotherm. These results imply that adsorbed SiW ions are non-interacting and "create" around themselves adsorption sites on the micelle. The temperature dependence of the adsorption constant showed that the SiW adsorption is enthalpically driven and entropically unfavorable, in line with the typical chaotropic thermochemical signature. The adsorption enthalpy can be split into an electrostatic term and a water-recovery term to evaluate and qualitatively predict the superchaotropicity of a nanoion.

Repulsive, but sticky - Insights into the non-ionic foam stabilization mechanism by superchaotropic nano-ions.

HYPOTHESIS: The superchaotropic Keggin polyoxometalate α-SiW12O404- (SiW) was recently shown to stabilize non-ionic surfactant (C18:1E10) foams owing to electrostatic repulsion that arises from the adsorption of SiW-ions to the foam interfaces. The precise mechanism of foam stabilization by SiW however remained unsolved. EXPERIMENTS: Imaging and conductimetry were used on macroscopic foams to monitor the foam collapse under free drainage and small angle neutron scattering (SANS) at a given foam height allowed for the tracking of the evolution of film thickness under quasi-stationary conditions. Thin film pressure balance (TFPB) measurements enabled to quantify the resistance of single foam films to external pressure and to identify intra-film forces. FINDINGS: At low SiW/surfactant ratios, the adsorption of SiW induces electrostatic repulsion within foam films. Above a concentration threshold corresponding to an adsorption saturation, excess of SiW screens the electrostatic repulsion that leads to thinner foam films. Despite screened electrostatics, the foam and single foam films remain very stable caused by an additional steric stabilizing force consistent with the presence of trapped micelles inside the foam films that bridge between the interfaces. These trapped micelles can serve as a surfactant reservoir, which promotes self-healing of the interface leading to much more resilient foam films in comparison to bare surfactant foams/films.

Aqueous solubilization of hydrophobic compounds by inorganic nano-ions: An unconventional mechanism.

HYPOTHESIS: Solubilization of hydrophobic compounds in water is commonly performed by using organic solubilizers such as hydrotropes, surfactants, co-solvents, and macrocycles to form host-guest complexes. 3,3'-commo-bis[closo-1,2-dicarba-3-cobaltadodecaborane] derivatives (COSANs) are fully inorganic and non-amphiphilic ionic boron clusters with nanometric size (nano-ions) showing superchaotropic properties as they strongly bind to neutral organic molecules. Therefore, we expect COSANs to act as solubilizers of sparingly water-soluble molecules, but with a mechanism different from all other organic solubilizers known so far. EXPERIMENTS: The aqueous solubilization efficiency of COSANs towards butanol was evaluated by determining phase diagrams and comparing them to classical solubilizers. Nanostructuration of the mixture was studied using UV spectroscopy, small-angle X-ray, and neutron scattering with contrast variation. FINDINGS: COSANs act as efficient aqueous solubilizers of medium-chain alcohols (0.6 < log P < 1.5). Unlike surfactants, COSAN is an efficient solubilizer in its monomeric state, at concentrations well below its critical aggregation concentration. Solubilization by COSAN takes place with a bi-dimensional anisotropic growth of COSAN/butanol co-assemblies, whereas solubilization by surfactant occurs via an isotropic swelling of micelles. Appealingly, COSANs/2-butanol co-assemblies efficiently solubilize more hydrophobic compounds with log P values up to around 6, offering new opportunities in many applied fields.

Ultrasonically controlled synthesis of UO2+x colloidal nanoparticles.

Actinide colloids and nanoparticles (NPs) currently constitute a topic of strong interest due to their potential role in advanced nuclear energetics and the environmental migration of radioactivity. A better understanding of the physico-chemical properties of nanoscale actinide oxides requires robust synthesis approaches. In this work, UO2+x NPs were successfully prepared by sonochemistry from U(IV) solutions previously stabilised in a hydrochloric medium (20 kHz, 65 °C, Ar/(10%)CO). Colloidal suspensions were found to be composed of crystalline and spherical NPs showing a UO2-like structure and measuring 18.0 ± 0.1 nm (SAXS, HR-TEM and PXRD techniques). In comparison with the controlled hydrolysis approach used as a reference, sonochemistry appears to be a simple and original synthesis route providing larger, better defined and more crystalline UO2+x NPs with a narrower size distribution. These well-defined NPs offer new opportunities for the preparation of reference actinide materials devoted to fundamental, technological and environmental studies.

First observation of [Pu6(OH)4O4]12+ cluster during the hydrolytic formation of PuO2 nanoparticles using H/D kinetic isotope effect.

New insights are provided about the formation mechanism of PuO2 nanoparticles (NPs) by investigating an unprecedented kinetic isotope effect observed during their hydrolytic synthesis in H2O or D2O and attributed to OH/OD zero point energy difference. The signature of a Pu(IV) oxo-hydroxo hexanuclear cluster, appearing as an important intermediate during the formation of the 2 nm PuO2 NPs (synchrotron SAXS/XAS), is further revealed indicating that their formation is controlled by H-transfer reactions occurring during hydroxo to oxo-bridge conversions.

Probing foams from the nanometer to the millimeter scale by coupling small-angle neutron scattering, imaging, and electrical conductivity measurements.

Liquid foams are multi-scale structures whose structural characterization requires the combination of very different techniques. This inherently complex task is made more difficult by the fact that foams are also intrinsically unstable systems and that their properties are highly dependent on the production protocol and sample container. To tackle these issues, a new device has been developed that enables the simultaneous time-resolved investigation of foams by small-angle neutron scattering (SANS), electrical conductivity, and bubbles imaging. This device allows the characterization of the foam and its aging from nanometer up to centimeter scale in a single experiment. A specific SANS model was developed to quantitatively adjust the scattering intensity from the dry foam. Structural features such as the liquid fraction, specific surface area of the Plateau borders and inter-bubble films, and thin film thickness were deduced from this analysis, and some of these values were compared with values extracted from the other applied techniques. This approach has been applied to a surfactant-stabilized liquid foam under free drainage and the underlying foam destabilization mechanisms were discussed with unprecedented detail. For example, the information extracted from the image analysis and SANS data allows for the first time to determine the disjoining pressure vs. thickness isotherm in a real, draining foam.

Why local and non-local terms are essential for second harmonic generation simulation?

Second Harmonic Generation (SHG) today represents one of the most powerful techniques to selectively probe all types of interfaces. However, the origin of the SHG signal at a molecular level is still debated since the local dipole contribution, which is strongly correlated to the molecular orientation can be counterbalanced by non-local quadrupole contributions. Here, we propose a method to simulate the SHG signal of a model water/air interface from the molecular response of each contribution. This method includes both local and non-local terms, which are represented, respectively, by the dependency of the polarisability and hyperpolarisability upon the chemical environment of the molecule and by the bulk quadrupole response. The importance of both terms for the sound simulation of the SHG signals and their interpretation is assessed. We demonstrate that the sole dipole term is unable to simulate a SHG signal, even if the dependency of the hyperpolarisability on the local environment is considered. The inclusion of the bulk quadrupole contribution, which largely dominates the dipole contribution, is essential to predict the SHG response, although the accuracy of the prediction is increased when the dependency upon the local environment is considered.

Size and structure of hexanuclear plutonium oxo-hydroxo clusters in aqueous solution from synchrotron analysis.

The size and shape of a water-soluble hexanuclear plutonium cluster were probed by combining synchrotron small-angle X-ray scattering (SAXS) and extended X-ray absorption fine structure (EXAFS). A specific setup coupling both techniques and dedicated to radioactive samples on the MARS beamline endstation at Synchrotron SOLEIL is described. The plutonium hexanuclear cores are well stabilized by the 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid ligands and this allows a good evaluation of the setup to probe the very small plutonium core. The results show that, in spite of the constrained conditions required to avoid any risk of sample dispersion, the flux and the sample environment are optimized to obtain a very good signal-to-noise ratio, allowing the detection of small plutonium aggregates in an aqueous phase. The structure of the well defined hexanuclear cluster has been confirmed by EXAFS measurements in solution and correlated with SAXS data processing and modelling. An iterative comparison of classical fit models (Guinier or sphere form factor) with the experimental results allowed a better interpretation of the SAXS signal that will be relevant for future work under environmentally relevant conditions.

Deciphering second harmonic generation signals.

Second harmonic generation (SHG) has emerged as one of the most powerful techniques used to selectively monitor surface dynamics and reactions for all types of interfaces as well as for imaging non-centrosymmetric structures, although the molecular origin of the SHG signal is still poorly understood. Here, we present a breakthrough approach to predict and interpret the SHG signal at the atomic level, which is freed from the hyperpolarisability concept and self-consistently considers the non-locality and the coupling with the environment. The direct ab initio method developed here shows that a bulk quadrupole contribution significantly overwhelms the interface dipole term in the purely interfacial induced second-order polarisation for water/air interfaces. The obtained simulated SHG responses are in unprecedented agreement with the experimental signal. This work not only paves the road for the prediction of SHG response from more complex interfaces of all types, but also suggests new insights in the interpretation of the SHG signal at a molecular level. In particular, it highlights the modest influence of the molecular orientation and the high significance of the bulk quadrupole contribution, which does not depend on the interface, in the total experimental response.

Ultrasonically assisted conversion of uranium trioxide into uranium(vi) intrinsic colloids.

Under oxidizing conditions, the corrosion of spent nuclear fuel may lead to the leaching of radionuclides including soluble uranyl-based species. The speciation of the generated chemical forms is complex and the related potential formation of colloidal species appears surprisingly poorly reported in the literature. Their formation could however contribute significantly to the mobility of radionuclides in the environment. A better knowledge in the speciation and reactivity of these species appears particularly relevant. This study describes the preparation and characterization of intrinsic uranium(vi) colloids from amorphous and crystalline UO3 in pure water assisted by 20 kHz ultrasound. In the presence of carbon monoxide preventing the sonochemical formation of hydrogen peroxide, ultrasonic treatment boosts the conversion of UO3 powder into (meta-)schoepite precipitates and yields very stable and notably concentrated uranium(vi) nanoparticles in the liquid phase. Using HR-TEM, SAXS and XAS techniques, we confirmed that the colloidal suspension is composed of quasi-spherical nanoparticles measuring ca. 3.8 ± 0.3 nm and exhibiting a schoepite-like crystallographic structure. The proposed method demonstrates the possible formation of environmentally relevant U(vi) colloidal nanoparticles appearing particularly interesting for the preparation of reference systems in the absence of added ions and capping agents.

Superchaotropic nano-ions as foam stabilizers.

HYPOTHESIS: Weakly hydrated nanometric ions, called superchaotropes, were recently shown to adsorb strongly to non-ionic surfaces affecting drastically the surface's physical-chemical properties due to a charging effect. Superchaotropic ions could serve as stabilizing agents for non-ionic colloidal systems, such as non-ionic surfactant foams. EXPERIMENTS: We study foams of the non-ionic surfactant BrijO10 (C18:1E10) without and in presence of the superchaotropic Keggin-ion SiW12O404- (SiW). The foams are investigated under free drainage conditions by image analysis and conductimetry to reveal the effect of SiW on the foam stability, liquid drainage, and bubble size. Additionally, small angle neutron scattering on the same foams, but in a dry quasi-stationary state, provides insight into effects of SiW on the foam films. FINDINGS: SiW strongly stabilizes non-ionic surfactant foams at millimolar concentrations by inducing electrostatic repulsions between foam film interfaces resulting in thicker and monodisperse foam films. A similar effect is observed with the ionic surfactant sodium dodecylsulfate (SDS) but to a lesser extent and with a different mechanism. At the foam films' interface, SiW adsorbs to the polar non-ionic surfactant heads driven by the superchaotropic effect whereas DS- anchors between non-ionic surfactant alkyl chains by the hydrophobic effect. The potential of superchaotropic ions as foam stabilizers is herein demonstrated.

Self-assembly of a short amphiphile in water controlled by superchaotropic polyoxometalates: H4SiW12O40 vs. H3PW12O40.

Nanometric ions, such as polyoxometalates (POMs) or ionic boron clusters, with low charge density have previously shown a strong propensity to bind to macrocycles and to adsorb to neutral surfaces: micellar, surfactant covered water-air and polymer surfaces. These association phenomena were shown to arise from a solvent-mediated effect called the (super-)chaotropic effect. We show here by combining cloud point (CP) measurements, scattering (SAXS/SANS) and spectroscopic techniques (NMR) that Keggin POMs: H4SiW12O40 (SiW) and H3PW12O40 (PW), induce the self-assembly of an organic solvent: dipropylene glycol n-propylether (C3P2), in water. The strong interaction between SiW/PW with C3P2 leads to a drastic increase in the CP, and aqueous solubility, of C3P2, e.g. SiW enables reaching full water-C3P2 co-miscibility at room temperature. At high POM concentrations, SiW leads to a continuous increase of the CP, forming SiW-[C3P2]1-2 complexes, whereas PW produces a decrease in the CP attributed to the formation of nearly "dry" spherical [PW]n[C3P2]m colloids, with n ~ 4 and m ~ 30. At high C3P2/PW contents, the [PW]n[C3P2]m colloids turn into large interconnected structures, delimiting two pseudo-phases: a PW-C3P2-rich phase and a water-rich phase. It is proposed that the stronger electrostatic repulsions between SiW (4-), compared to PW (3-), prevents the formation of mesoscopic colloids.

Highlights on the Binding of Cobalta-Bis-(Dicarbollide) with Glucose Units.

Metalla-bis-dicarbollides, such as the cobalta-bis-dicarbollide (COSAN) anion [Co(C2 B9 H11 )2 ]- , have attracted much attention in biology but a deep understanding of their interactions with cell components is still missing. For this purpose, we studied the interactions of COSAN with the glucose moiety, which is ubiquitous at biological interfaces. Octyl-glucopyranoside surfactant (C8G1) was chosen as a model as it self-assembles in water and creates a hydrated glucose-covered interface. At low COSAN content and below the critical micellar concentration (CMC) of C8G1, COSAN binds to C8G1 monomers through the hydrophobic effect. Above the CMC of C8G1, COSAN adsorbs onto C8G1 micelles through the superchaotropic effect. At high COSAN concentrations, COSAN disrupts C8G1 micelles and the assemblies become similar to COSAN micelles but with a small amount of solubilized C8G1. Therefore, COSAN binds in a versatile way to C8G1 through either the hydrophobic or superchaotropic effect depending on their relative concentrations.

How Nano-Ions Act Like Ionic Surfactants.

Recently, nanometric ions were shown to adsorb to hydrated neutral surfaces and to bind to the cavities of macrocyclic molecules with an unexpectedly strong affinity arising from a solvent-mediated effect named superchaotropicity. We show here that nano-ions at low concentrations (µm range), similarly to anionic surfactants, induce the spontaneous transformation of a swollen lyotropic lamellar phase of non-ionic surfactant into a vesicle phase. This transition occurs when the neutral lamellae acquire charges, either by adsorption of the nano-ions onto, or by anchoring of the ionic surfactant into the lamellae. In contrast to ionic surfactants, nano-ions strongly dehydrate the neutral surfactant assemblies. As a conclusion, these purely inorganic nanometric ions act as alternatives to the widely used organic ionic surfactants.

Investigation of the Structure of Concentrated NaOH Aqueous Solutions by Combining Molecular Dynamics and Wide-Angle X-ray Scattering.

Classical molecular dynamics has been performed with explicit polarization on NaOH aqueous solutions from 0.5 mol L-1 up to 9.7 mol L-1. We adapted a force field of OH- for polarizable simulation in order to reproduce the NaOH structural and thermodynamics properties in aqueous solutions. A good agreement between theoretical and experimental results has been found. Wide-angle X-ray scattering (WAXS) intensities issued from molecular dynamics are compared to experimental ones measured on Synchrotron facilities. The structure of the first coordination shell of Na+ has been studied to determine the variation of the oxygen number and hydroxide oxygen around the cation. In addition, Na+-OH- McMillan-Mayer potential issued from molecular dynamics simulations has been calculated and allows for calculating Na+-OH- pair association constant of 0.1 L mol-1, which is in good agreement with the experiments.

Probing the interactions among sphingosine and phytosphingosine ceramides with non- and alpha-hydroxylated acyl chains in skin lipid model membranes.

Ceramides (Cers) are significant constituents of the stratum corneum (SC), the uppermost skin layer responsible for skin barrier properties. Cers are a heterogeneous group of lipids whose mutual interactions are still unclear. To better understand these interactions, we characterized model membranes containing stearic acid, cholesterol, cholesterol sulfate and one or more of the following ceramides: N-stearoyl-sphingosine (CerNS), N-stearoyl-phytosphingosine (CerNP) and N-(2-hydroxy)stearoyl-phytosphingosine (CerAP). Small angle X-ray scattering and FTIR spectroscopy were used to study lipid arrangement, phase separation and thermotropic behaviour. In the one-Cer systems, the membranes with CerNP showed strong hydrogen bonding and significant phase separation, even after phase transition, while the systems containing CerAP and CerNS had increased lipid miscibility. The multi-Cer systems exhibited different behaviour. In particular, the membrane containing all three Cers was a highly miscible system with narrow one-step phase transition, which, of all the studied samples, occurred at the lowest temperatures. Our results show that even a small variation in Cer structure results in substantially different phase behaviour, which is further affected by the presence of other Cer subclasses. Interestingly, the phase behaviour of the most complex three-Cer system was simpler than that of the others, highlighting the importance of lipid diversity in real SC.

Self-Assembly of Short Chain Poly- N-isopropylacrylamid Induced by Superchaotropic Keggin Polyoxometalates: From Globules to Sheets.

We show here for the first time that short chain poly( N-isopropylacrylamide) (PNIPAM), one of the most famous thermoresponsive polymers, self-assembles in water to form (i) discrete nanometer-globules and (ii) micrometric sheets with nm-thickness upon addition of the well-known Keggin-type polyoxometalate (POM) H3PW12O40 (PW). The type of self-assembly is controlled by PW concentration: at low PW concentrations, PW adsorbs on PNIPAM chains to form globules consisting of homogeneously distributed PWs in PNIPAM droplets of several nm in size. Upon further addition of PW, a phase transition from globules to micrometric sheets is observed for PNIPAMs above a polymer critical chain length, between 18 and 44 repeating units. The thickness of the sheets is controlled by the PNIPAM chain length, here from 44 to 88 repeating units. The PNIPAM sheets are electrostatically stabilized PWs accumulated on each side of the sheets. The shortest PNIPAM chain with 18 repeating units produces PNIPAM/PW globules with 5-20 nm size but no sheets. The PW/PNIPAM self-assembly arises from a solvent mediated mechanism associated with the partial dehydration of PW and of the PNIPAM, which is related to the general propensity of POMs to adsorb on neutral hydrated surfaces. This effect, known as superchaotropy, is further highlighted by the significant increase in the lower critical solubilization temperature (LCST) of PNIPAM observed upon the addition of PW in the mM range. The influence of the POM nature on the self-assembly of PNIPAM was also investigated by using H4SiW12O40 (SiW) and H3PMo12O40 (PMo), i.e. changing the POM's charge density or polarizability in order to get deeper understanding on the role of electrostatics and polarizability in the PNIPAM self-assembly process. We show here that the superchaotropic behavior of POMs with PNIPAM polymers enables the formation and the shape control of supramolecular organic-inorganic hybrids.